Feedback
LOCATION : HOME > NEWS
NEWS
Cutting Plotter
PUBLISHED : 2019-06-11

The installation steps of the cutting plotter are as follows:

1. Unpack the packing box, first clean the cutting machine car fixing tape and anti-collision;
2. Connect the plotter and the power socket first with the supplied power cable;
3. Connect the cutting plotter and computer with the supplied communication cable;
4. Insert the knife seat or the pen holder into the cutting machine tool holder and tighten the fixed knife holder or the pen holder;
5, turn on the power;
6. Place the medium and lower the pressure roller (Note: the position of the pressure roller should be at the edge of the medium and ensure that the position does not deviate from the working area);
7. Set parameters (computer part setting: a, select model; b, selected port and set flow mode. Cutting plotter setting: a, set coordinate origin; b, adjust tool depth, etc.);
8, the plotter self-test;
9, through the computer to transmit data detection plotter, can output normally is ready.
Now you can send instructions to the computer to draw the work.